The STHD is an embedded strap-tie holdown offering high loads and a staggered nail pattern to help minimize splitting. The STHD incorporates many features that aid correct installation and improve performance. When installed on the forms with the StrapMate® strap holder, the unique design of the STHD delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement (relative to the form). This results in accurate positioning of the strap and reduced possibility of spalling. Front-to-back concrete bond is strengthened by the slots below the embedment line and also aids in reducing spalling. Rim joist models are designed to fit up to a 17″ clear span without any loss of strap nailing while still providing all the benefits of the STHD model.
Installation:
- See General Notes for Holdowns and Tension Ties.
- Use all specified fasteners; see General Notes.
- Use tables for both standard concrete and post-tension slab installations.
- Install before concrete pour with a StrapMate, or other holding device.
- Nail strap from the bottom up. Install strap plumb.
- Strap may be bent one full cycle (bent horizontal 90° then bent vertical) to aid wall placement, but may cause spalling behind the strap. If the spall is 1″ or less, measured from the embedment line to the bottom of the spall, full loads apply. 1″ to 4″ spalls for LSTHD8 achieve 0.9 times table loads. STHD10 and STHD14 achieve full load for spalls less than 4″. Any portion of the strap left exposed should be protected against corrosion.
- Other than where noted in the two-pour detail, do not install where: (a) A horizontal cold joint exists within the embedment depth between the slab and foundation wall or footing beneath, unless provisions are made to transfer the load, or the slab is designed to resist the load imposed by the anchor; or (b) Slabs are poured over concrete block foundation walls.
- Additional studs attached to the shearwall studs or post may be required by the Designer for wall sheathing nailing.
- Wood shrinkage after strap installation across horizontal members may cause strap to buckle outward.
- For installations in severe corrosion environments, refer to General Corrosion Risks for additional considerations
California Residents: WARNING
Prompt Shipping and Professional Packing
We have a range of shipping options due to our long-term partnership with UPS FedEx DHL. Our warehouse staff are highly educated and will package the goods according to our precise and exact specifications. Prior to shipping, your goods will be thoroughly inspected and secured. Everyday, we send to thousands of clients in different countries. This is a sign of our commitment to be the largest online retailer globally. The warehouses are located situated in Europe just as they are in USA.
Note: Orders with more than one item will be assigned a separate processing period for each item.
Before shipment, all ordered items will be thoroughly inspected. The majority of orders will be delivered within 48 hours. The expected delivery time will be between 3-7 days.
Returns
Stock is dynamic. It's not completely managed by us, as we are involved with multiple parties such as the factory and our storage. The actual stock can be changed at any time. It is possible that inventory could run out once your order has been placed.
The policy is for 30 days. We will not replace or refund your purchase after 30 days from the date of purchase.
In order for your item to be considered eligible for return it must be in its original packaging, unopened and in the same state as you received it in. It must also be in the original packaging.
Related products
